Can work on LaCrosse LC (ILL) 90 and other machines that have a T-handle locks.  1-1/2" long.  This fits machines that have hole in the "T" handle where the lock goes of .75".  LaCrosse used two different sizes so be sure to check it out.  If you need the smaller size let us know.

This lock also works on any Vendo or VMC machine with a "T" handle or "L" handle.  If they have this style handle then this is the lock for you. They all used this size.

If you need to remove a lock like this follow these instructions:  Start in the very center of the lock with a 1/8" drill bit.  Drill in about 3/4".  Then go up a size in drill bit and drill in about 1/2".  Repeat until you get to the outer ring.  Once the pins come out you can put a screw or "easy-out" in the first hole and turn.  It should open.