For machines such as CS-96, CS-72, CS-64, CSS-64, CSS-96 and probably more we haven't tried. Stainless steel. Measures approx 3.5" OD = 5/16 Pictured with two springs shown but sold individually.
MADE IN USA!
To replace springs: Remove bottle door from machine, then remove hinge from door. Take a 5/32 pin punch and drive it through the pointed side of pin. As soon as it driven about 1/2" out put the pin in a vice and pull with a twisting motion until pin is removed all the way through the spring. Shove pin half way through opening for new spring. Insert new spring and give the spring one full revolution to tighten spring, drive pin through the center section of the hinge. Make sure spring is tight, shove it half way through the center section all of this time the pin is still locked in the vise. Align the last outer tube with the center section and shove the pin farther into it. Now remove the hinge pin from the vise and tap the remaining pin flush with hinge.
